- Expertise
- Bonding of Front En made of GFRP
Bonding of Front End made of GFRP
Are you facing problems while grinding GFRP materials? Read in our success story how you can avoid these problems thanks to our completely surface dry adhesives.
Customer Requirements
- Long open time of 45 minutes at least
- Fast curing after pot life - important for post-processing steps
- Very good grindability properties (very dry adhesive surface) for subsequent painting process
- Gap filling properties in order to compensate part tolerances
- Spaltüberbrückung um Toleranzen auszugleichen
- Certification according to DIN EN 45545-2 R1, R7, R17; HL 1-3
Kisling Solution: 7430
- Universal and high strength
- Good gap filling properties
- Very good adhesion to metals
- Good chemical resistance
- Certification according to DIN EN 45545-2 R1, R7, R17; HL 1-3
Customer Benefits
- Optimal processing time of up to 50min (manual application of adhesive, positioning & fixing of the parts)
- Fast curing after pot life in order to shorten time to post-processing work (grinding)
- Very dry adhesive surface after cure for optimal grinding operation
- Certification according to DIN EN 45545-2 R1, R7, R17; HL 1-3
