- Products
- Product overview
- 4715 Power Rust Dissolver Mineral Oil Free
Power Rust Dissolver Mineral Oil Free
Dissolves safely and cleans intensively – N-Hexan free
Our mineral oil-free power rust remover is ideal for removing rusted compounds and diesel injectors. Also suitable for cleaning rust film, rust stains, oily and greasy dirt and encrustations. Enables deep penetration through the new KENA® microfluid active ingredient formula. The rust is disassembled and detached from the surface. Airs off slowly and can take effect for several hours. Can be used selectively or for surface cleaning. Very economical and free of mineral oil.
Advantages:
- Unique active formula
- Economical in use
- Dissolves rust and encrustations
- Environmentally friendly
Spezifikationen
| Eigenschaften | Bedingung |
|---|---|
| Chemische Basis | Solvent-based surfactant solution |
| Farbe | Light yellow |
| Dichte | 0,75 g/ml (20°C) |
| pH-Wert | 5,0 - 7,0 |
| Besondere Eigenschaften | Biologically degradable |
| Treibgas | Propane/butane |
| Frei von | Mineral oil, silicone oil |
| Verarbeitungstemperatur | 5°C - 35°C |
| Lagertemperatur | 10°C - 25°C |
| Lagerstabilität | 24 months |
| Verpackung | 250 ml aerosol |
| Produktvarianten | A471525001 250 ml |
| Artikelnummer | 4715 |
| Anwendung | 1. Spray onto rusted connections / surfaces. 2. Depending on the degree of rust, allow to act up for 24 h. Work in with a brush or a towel. 3. Rinse with water or wipe off. 4. If necessary, repeat. Note: May cause discoloration on surfaces or dissolve plastics. Check the suitability prior to use. |
