Power Rust Dissolver Mineral Oil Free

Dissolves safely and cleans intensively – N-Hexan free

Our mineral oil-free power rust remover is ideal for removing rusted compounds and diesel injectors. Also suitable for cleaning rust film, rust stains, oily and greasy dirt and encrustations. Enables deep penetration through the new KENA® microfluid active ingredient formula. The rust is disassembled and detached from the surface. Airs off slowly and can take effect for several hours. Can be used selectively or for surface cleaning. Very economical and free of mineral oil.

 

Advantages:

  • Unique active formula
  • Economical in use
  • Dissolves rust and encrustations
  • Environmentally friendly

Spezifikationen

EigenschaftenBedingung
Chemische BasisSolvent-based surfactant solution
FarbeLight yellow
Dichte0,75 g/ml (20°C)
pH-Wert5,0 - 7,0
Besondere EigenschaftenBiologically degradable
TreibgasPropane/butane
Frei vonMineral oil, silicone oil
Verarbeitungstemperatur5°C - 35°C
Lagertemperatur10°C - 25°C
Lagerstabilität24 months
Verpackung250 ml aerosol
ProduktvariantenA471525001 250 ml
Artikelnummer4715
Anwendung1. Spray onto rusted connections / surfaces. 2. Depending on the degree of rust, allow to act up for 24 h. Work in with a brush or a towel. 3. Rinse with water or wipe off. 4. If necessary, repeat. Note: May cause discoloration on surfaces or dissolve plastics. Check the suitability prior to use.

Sicherheitsdatenblatt

LandSchweizEU
SpracheDeutschFranzösischItalienischDeutschEnglischFranzösischItalienisch

Technische Informationen

DeutschEnglisch
Technisches Datenblatt
Gebrauchsanweisung

Get in touch with us

Oops, an error occurred! Code: 20241221164908ae4c73f2