1810
Methacrylate structural adhesive
The product is suitable to bond metals like aluminum, steel, brass and its alloys as well as ferrite and combinations. It is a two-component system and cures after mixing into a tack-free, high-strength and impact resisting polymer film. The best mixture-ratio is 1:1 (V:V) and is obtainable without problems by using the common double-cartridges.
Specifications
| Characteristics | Condition |
|---|---|
| Product category | Modified urethane acrylate |
| Color | purple (after cure) |
| Mixing ratio | 1:1 (V:V) |
| Viscosity [mPas] (shear rate 10s-1) | 125 000 thixotropic (Mix) |
| Viscosity [mPas] (shear rate 100s-1) | 4 500 (Mix) |
| Pot life [min] | 3 – 6 |
| Fixture time [min] | 7 – 9 |
| Final strength [h] | ~12 |
| Tensile shear strength [N/mm2] (Alu-Alu; DIN EN 1465) | >32 |
| Tensile shear strength [N/mm2] (Steel-Steel; DIN EN 1465) | >37 |
| Elongation at break [%] (Nach ISO 527-2) | ~35 |
| Temperature range [°C] | -40 – +150 |
| Container size Bulk containers on request | 50 ml |
| Dispensing gun | 4472101 Dispensing gun, manual / 1:1 und 1:2 / 50ml |
| Mixer | 4472046 Quadro B-Sys MBQ 05-16L / 1:1 & 2:1 / 50ml |
